Chop-N-Feed Bucket

Description

ProDig Chop ’N’ Feed bucket is available in three sizes from 2m to 2.5m which will suit tractor loaders, telehandlers, articulated loaders & Tractor 3 Point Linkage. This versatile unit is equipped with a hydraulic motor which drives a heavy-duty auger for both chopping and feeding out so there is no need for a PTO drive. The large output on the bucket allows the bucket to unload and chop in a minimal amount of time.

  • Auger motor is fitted on the rear of the bucket rather than the side to allow use in close proximity with walls.
  • Motor fitted with pressure relief valve set to stop when blade encounters a stone or hard object.
  • Profiled Hardox chopping wheel with different feed out rates available.
  • Option of right or left-hand feed out.
  • Four minutes per cubic meter chop rate.
  • Easy access to all moving parts.
  • Heavy duty buckets construction to allow for use on all machines.
  • Bolt on hitch system means the bucket can be mounted off centered if required.
  • Hardened 400 grade cutting edge and curved side wear leading edge to hold more material as standard.
  • Available with bolt on hitch system to fit all machines.
  • Four minutes per cubic meter chop rate.
  • Not to be used with lift/ breakout force from the loader to loosen material – loose free flowing material only.
  • Additional Options: 300mm long spout extension, internal baffle plate.

Features

  1. Hardened cutting edge and leading edge
  2. Available with bolt on hitch system to fit all machines
  3. Option of right or left-hand side chopping.
  4. Four minutes per cubic meter chop rate

Technical Data

Beet bucket
Beet bucket 2.0m 2.3m 2.5m
Width (mm) (Cutting Edge) A 2000 2300 2500
Total Width (mm) (Including spout) B 2295 2595 2795
Height (mm) C 1025 1025 1025
Depth (mm) D 1430 1430 1430
Capacity (m3) 1.54 1.78 1.95
Weight (kg) 615 676 725
Shell (mm) 6 6 6
Sides (mm) 6 6 6
Cutting edge (mm) 15×150 15×150 15×150
Max RPM 120 120 120
Max KG Per m³ Of Material (KG/m3) 1000 1000 1000

All measurements approx (±5mm, ±5kg)
Weight excludes brackets as these vary

Models

PRODUCT PRODUCT CODE
Chop’N’Feed Bucket (2.0m) CNF2000
Chop’N’Feed Bucket (2.3m) CNF2300
Chop’N’Feed Bucket (2.5m) CNF2500
3 Point linkage with Hydrulic Top Link TBB100-3PL-C2-CNF
300 mm Long Spout Extension CNF-300-EXT-01
Tractor Bolt on Brackets TBB 100
Industrial Bolt on Brackets IDBB 100

User Manual

User Manual