Pro-Shear

Description

The Pro Shear is one of ProDig flagship products and has been tried and tested in the toughest environments around the world over the last decade. It is manufactured with heat treated blades & 35mm Hardox tines to reduce waste and down time due to breakages.

Shear grabs are available in widths from 1.3m to 2.2m.
Built using high tensile steel in fork and grapple construction.
Manufactured with 35mm wide, 885mm long Hardox tines.
Hardox tines are manufactured with replaceable wear tips meaning the tine never has to be replaced.
Heat treated, hardened cutting blades as standard for superior cut and long life.
45mm pivot pins fitted with wrapped PTFE lined bearing bushings.
40mm ram pins fitted with glacier acetal lined bushings
All pivot points fitted with replaceable, greaseable bushings.
Nickel chrome plated hydraulic cylinders for long life in an aggressive environment.
Bolt on hitch brackets to suit all machines.
Optional pressure relief valve for machines in excess of 200 Bar hydraulic pressure.

Technical Data

Model		SG 1300	SG 1500	SG 1800	SG 2200
Weight, without Hitch (kg)		540	583	673	776
Weight of push off system (kg)		48	48	48	48
Weight, including push off system (kg)		588	631	721	824
Total width (mm)	A	1420	1620	1920	2320
Total depth (mm)	B	1100	1100	1100	1100
Total height (mm)	C	1040	1040	1040	1040
Max block width (mm)	D	1300	1500	1800	2200
Max block height (mm)	E	800	800	800	800
Max height (open implement) (mm)	F	1440	1440	1440	1440
Capacity (m3)		0.92	1.06	1.28	1.56
Number of cylinders x Diameter (mm)		2 x 90 Bore	2 x 90 Bore	2 x 100 Bore	2 x 100 Bore
*Maximum working pressure (BAR)		200 BAR	200 BAR	200 BAR	200 BAR
**Required oil pressure (BAR)		170 BAR	170 BAR	170 BAR	170 BAR
**Required lifting (kg) (silage at 800kg/m3)		1276	1431	1697	2024
Number of tines		9	10	12	15
Tine Thickness (mm)		35	35	35	35
Tine Length (mm)		880	880	880	880
Distance between tines (mm)		116	122	121	116

All measurements approx (±5mm, ±5kg), Weight excludes brackets as these vary.
*Machines operating above 200 BAR will require a pressure relief valve.
**This information depends on the type of silage and serves as guidance only.

Gallery

Models

PRODUCT	PRODUCT CODE
Shear Grab (1.3m)	SG 1300
Shear Grab (1.5m)	SG 1500
Shear Grab (1.8m)	SG 1800
Shear Grab (2.2m)	SG 2200
Single Cylinder Centre Push Off System	SG-PO-01
1.3m Maize Infill Panel	SG-1300-F-MESH
1.3m Maize Infill Panel (No Centre for Push Off)	SG-1300-PO-MESH
1.5m Maize Infill Panel	SG-1500-F-MESH
1.5m Maize Infill Panel (No Centre for Off )	SG-1500-PO-MESH
1.8m Maize Infill Panel	SG-1800-F-MESH
1.8m Maize Infill Panel (No Centre for Push Off)	SG-1800-PO-MESH
2.2m Maize Infill Panel	SG-2200-F-MESH
2.2m Maize Infill Panel (No Centre for Push Off)	SG-2200-PO-MESH
Tractor Bolt on Brackets	TBB 100
Industrial Bolt on Brackets	IDBB 100
Replacement weld on Hardox wear tips for tines (each)	HX TIP